Calculator
Gravel calculator
Gravel, crushed stone or sand for a driveway, path or base: volume, weight and bags.
Estimate onlySources reviewed 2026-11-14See the sources
What this calculator is for
This gravel calculator works out how much gravel, crushed stone or sand to order for a driveway, path, patio base or drainage layer. You get the volume, the weight suppliers usually sell by, and, if you want them, bag counts and cost.
How to measure
- Split the area into rectangles, circles and triangles. Add one area row for each part.
- Rectangle: length and width. Circle: straight across the middle (the diameter). Triangle: one side as the base, and the distance from it to the opposite corner as the height.
- Measure the depth of the finished layer in inches (or centimetres).
- Ask your supplier for the weight of their material if you can: it is the best figure to use.
The formula
- Area: rectangle = length × width; circle = π × diameter² ÷ 4; triangle = base × height ÷ 2. Several areas are added.
- Volume = area × depth × (1 + waste ÷ 100), with depth in feet (inches ÷ 12). Cubic yards = cubic feet ÷ 27 (S8).
- Weight in US tons = cubic yards × density in lb per cubic yard ÷ 2,000 (S8). Tonnes = pounds × 0.45359237 ÷ 1,000 (S8).
- Density is the weight of one cubic yard of loose material, by material (S1, S2).
Worked example
The example "Stone ring around a tree" in the start panel: a circle 6 ft across covered with 1 in of crushed gravel. Both sizes have a source (shown with the example).
- Area = π × 6² ÷ 4 = 28.27 sq ft.
- Depth = 1 in ÷ 12 = 0.0833 ft. Volume = 28.27 × 0.0833 = 2.36 cu ft.
- 2.36 ÷ 27 = 0.09 cu yd (S8).
- Weight = 0.09 cu yd × 2,700 lb ÷ 2,000 = 0.12 US tons (crushed gravel, S1).
- No waste added. Enter a price under More options to see the cost.
Questions
- Why does the weight change when I pick another material?
- Each material has its own loose density in the highway agency tables, from 2,400 lb per cubic yard for screenings to 2,700 for crushed gravel (S1).
- Why is there a range for sand?
- The source gives sand as 2,400 to 2,600 lb per cubic yard (S1). The calculator fills in the midpoint; change it under More options if your supplier gives a figure.
- Are these figures for compacted gravel?
- No. They are loose measure, as the material comes off the truck (S1).
- Should I add extra for waste?
- Our sources give no figure for gravel. The calculator adds nothing unless you enter your own percentage under More options.
- Can I mix shapes?
- Yes. Add an area row for each part; the calculator adds the areas and shows each one in the breakdown.
Reference: loose densities of aggregates
Scroll the table sideways for more →
| Material | lb per cu yd | kg per m³ | US tons per cu yd | Source |
|---|---|---|---|---|
| Crushed gravel (1 in. to dust, loose) | 2,700 | 1,602 | 1.35 | S1 |
| Crushed limestone (1 in. to dust, loose) | 2,550 | 1,513 | 1.28 | S1 |
| Crushed granite (1 in. to dust, loose) | 2,600 | 1,543 | 1.3 | S1 |
| Screenings (loose) | 2,400 | 1,424 | 1.2 | S1 |
| Sand | 2,400–2,600 | 1,424–1,543 | 1.2–1.3 | S1 |
| Loose road aggregate, planning factor (gravel, crushed stone) | 2,800–3,000 | 1,661–1,780 | 1.4–1.5 | S2 (1.40 t/yd³), S1 (1.5 t/yd³) |
Sources
- S1: California Department of Transportation (Caltrans), Maintenance Manual Vol. 1, Appendix "Useful Information", July 2014, pages Appen-28 (loose aggregate, 1.5 tons per cubic yard) and Appen-31 (broken stone and sand, loose measure).
- S2: Missouri Department of Transportation, Engineering Policy Guide, "450 Estimate Factors": aggregate surface of gravel, crushed stone and chat "based on 1.40 tons/yd³ of loose aggregate".
- S8: National Institute of Standards and Technology, Guide to the SI (SP 811), Appendix B.8: 1 ft = 0.3048 m, 1 in = 2.54 cm, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L, 1 short ton = 2,000 lb.
Every figure on this page comes from these sources. Where a source gives a range, the calculator shows the range and lets you change the value.